These self-lubricating bronze bushings will take your Moxon vise to the next level!
Insert these bushings into the moveable jaw of your Moxon vise then run your 3/4 inch diameter Acme threaded rod through them. They protect your wooden jaw and the self-lubricating feature allows the jaw to move smoother than just riding on a wooden hole.
Install the bushings by drilling a 1-inch diameter hole in the moveable jaw of the Moxon vise for the Acme threaded Rod. Insert the bushing into the rear of the hole. This configuration gives the moveable jaw enough room to pivot about 10 degrees while riding smoothly on the bushings. Bushings inside diameter is just slightly larger than 3/4 inch (0.775”).
Sold in pairs (2 per order).
Self-lubricating, bronze tube.
1-inch outside diameter x 3/8 inches long.
0.775 inch inside diameter (just slightly larger than 3/4 inch).